Search:

HIS Model HB1A-6

HIS Clamp-On Roller HB1A-6 is a 6” SPLIT-BOX TYPE CABLE ROLLER GUIDE designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through.

Aluminum Base Casting - Top and Bottom

Quick Tee-Handle Clamp-On with Swivel Base

6” Zinc Plated or Stainless Steel Rollers

3/8” Locking Pin for Locking and Unlocking Unit

Ball-Bearing Rollers for Reduced Pulling Tension

Weight: Approx 9 Lbs.
his business product image
his business product image HB1A-6 Open his business product image HB1A-6 Closed his business product image Vertical Rise - Front his business product image Vertical Rise - Back
(click thumbnail image to enlarge)

HIS Model HB1A-9

HIS Clamp-On Roller HB1A-12 is a 12” SPLIT-BOX TYPE CABLE ROLLER GUIDE designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through.

HIS HB1A-9  Universal Configurations:
  • Side-Tray Clamp can be Quickly Clamped On to the Side of the Tray
  • Can be Mounted on the Cross-Bar with Force Rollers on Top and Bottom for Vertical Rises
  • Can be Mounted on the Cross-Bar Using the 90° Bracket with Force Rollers on Sides for Horizontal Bends
  • Can be Suspended Above the Tray with a Cross-Bar and Extended Tray Clamps

More Features  →
his business product image
his business product image HB1A-9-STC - Side Tray Clamp his business product image HB1A-9x48 his business product image HB1A-9x48 with 90° Bracket his business product image HB1A-9x48-EXT
(click thumbnail image to enlarge)

HIS Model HB1A-12

HIS Clamp-On Roller HB1A-12 is a 12” SPLIT-BOX TYPE CABLE ROLLER GUIDE designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through.

Aluminum Base Casting - Top and Bottom

12” Zinc Plated or Stainless Steel Rollers

“T”-Handle Clamp with Swivel Base

3/8” Locking Pin for locking and unlocking unit

Ball-Bearing Rollers for Reduced Pulling Tension

Weight: Approx 11 Lbs.
his business product image
his business product image HB1A-12 his business product image Straight Run his business product image Vertical Rise his business product image Vertical Rise - Open
(click thumbnail image to enlarge)

HIS Model HB4A

HIS Cross-Tray Roller HB4A is an INSIDE VERTICAL RISER ROLLER designed for guiding cable inside vertical risers for cable installation in tray.

Place a series of these on the radius to create “Minimum Bend-Radius” required by cable-manufacturers

HIS HB4A is equipped with a 48” long Cross-Tray Bar and 2 Tray Clamps for 4” - 6” cable-tray sidewall

Provided with standard 10 1/4” Dia x 5” Wide alloy aluminum sheave and Vertical Brackets with Locking-Pin 3/4” Dia x 10” Lg.

Optional clamps are available for other sidewall heights
his business product image
his business product image HB4A his business product image Complete Assembly his business product image Straight Run
(click thumbnail image to enlarge)

HIS Model HB5A

HIS Cross-Tray Roller HB5A is a HORIZONTAL ELBOW ROLLER designed for guiding cables around horizontal elbows for cable installation in tray.

Place a series of these on the radius to create “Minimum Bend-Radius” required by cable-manufacturers

HIS HB5A is equipped with a 48” Long Cross-Tray Bar and 2 Tray Clamps for 4” - 6” cable-tray sidewall

Provided with standard 10 1/4” Dia x 5” Wide alloy aluminum sheave and Horizontal Sheave Bracket with 3/4” Dia axle

Optional clamps are available for other sidewall heights
his business product image
his business product image HB5A his business product image Compete Assembly his business product image Horizontal Bend his business product image Horizontal Bend - Underneath
(click thumbnail image to enlarge)

HIS Model HB6A/7A

HIS Cross-Tray Roller HB6A-7A is an OUTSIDE VERTICAL RISER OR STRAIGHT RUN ROLLER designed for guiding cable outside vertical risers or for straight runs for cable installation in tray. Three individual units make up the low-profile cross-tray roller assembly.

Place a series of these on the radius to create “Minimum Bend-Radius” required by cable-manufacturers or several in-line on the straight section of cable-tray

HIS HB6A-7A is equipped with a 48” Long Cross-Tray Bar and 2 Tray Clamps for 4”-6” cable-tray sidewall

Provided with 2 Vertical Guide Rollers and 1 Double-Roller Horizontal “Force” Roller

Optional clamps are available for other sidewall heights
his business product image
his business product image HB6A/7A his business product image Complete Assembly his business product image Vertical Rise
(click thumbnail image to enlarge)

HIS Model HB9A

HIS Cross-Tray Roller HB9A is an OUTSIDE VERTICAL RISER OR STRAIGHT RUN ROLLER designed for guiding cable outside vertical risers or for straight runs for cable installation in tray. A single unit makes up the assembly.

Place a series of these on the radius to create “Minimum Bend-Radius” required by cable-manufacturers or several in-line on the straight section of cable-tray

HIS Model HB9A is equipped with a 48” Long Cross-Tray Bar and 2 Tray Clamps for 4” - 6” cable-tray sidewall

The HIS HB9A can be used around horizontal elbows with optional 90° bracket

HIS HB9A frame houses 2 Vertical Guide Rollers and 2 Horizontal “Force” Rollers
Optional clamps are available for other sidewall heights
his business product image
his business product image HB9A his business product image Complete Assembly his business product image Vertical Rise his business product image Horizontal Bend
(click thumbnail image to enlarge)